Quick Specs
- Size: 5 inches or taller; dimensions vary per piece
- Type: Crystal point, free-form shaped
- Material: Selenite (gypsum, calcium sulfate dihydrate, CaSO4-2H2O)
- Best For: Altar display, energy clearing, charging other stones, meditation
A Stone That Earns Its Altar Spot
Selenite takes its name from Selene, the Greek moon goddess, and the association makes sense once you hold a polished piece. The mineral is gypsum (calcium sulfate dihydrate, CaSO4-2H2O), not a quartz variety. It forms in evaporite deposits and cleaves along parallel planes that give it that characteristic silky, striated surface. The iceberg point shape plays up those striations deliberately: the piece is cut in stacking widths that widen from the base and taper at the top, echoing an iceberg’s visible mass just above the surface.
In New Age and Western crystal work, selenite is broadly associated with clarity, energetic cleansing, and high-frequency work. It turns up across many traditions as a threshold stone, something you place at the entrance of a space or use to prepare a working area before deeper practice. I carry it because it does real work as a display piece that doubles as a charging station. Place crystal points, tumbled stones, or small objects alongside it overnight and many practitioners find the pieces feel refreshed by morning. Whether that’s energetic or simply the ritual of intention, the practice itself is grounding.
One thing I want to flag clearly: selenite is fragile and water-soluble. This isn’t quartz. It sits at about 2 on the Mohs scale, which means it scratches easily, and soaking it in water will slowly dissolve the surface. You won’t ruin it with a fingerprint, but don’t drop it, don’t put it in a tumbling cleanse bowl of water, and keep it away from prolonged humidity. For energetic cleansing, smoke, sound, and moonlight are all fine options. Browse my full selenite collection if you’re building out a selenite-focused practice.
How to Work With Your Selenite Iceberg Point
Three practical ways to use a selenite iceberg point in your space and ritual practice.
- Set Your Space
Place the selenite iceberg point on your altar or shelf before you begin any ritual work. Its layered form naturally draws the eye upward, so position it where you want energy to move. Give it a moment to settle into the room before you proceed.
- Use It as a Charging Station
Set tumbled stones, a crystal grid, or a piece of jewelry directly against the base of the iceberg point overnight. Selenite is commonly used to refresh the energetic charge of other stones without needing recharging itself.
- Keep It Dry
Selenite is calcium sulfate dihydrate and dissolves slowly in water. Do not rinse, soak, or leave it in a humid spot long term. To clear it energetically, pass it through smoke, set it in moonlight, or place it briefly on a dry salt bed instead.
The Tarot Fellow Standard
I stock selenite pieces through a supplier with consistent quality control on both cut finish and size minimums. What I look for is clean cleavage lines, no stress fractures through the striations, and a surface that isn’t over-polished to the point of hiding the mineral’s natural character. The iceberg form specifically needs to hold its tiered shape without crumbling at the edges, and the pieces I carry meet that bar. Sizes vary, as they always do with natural material, but the 5-inch floor is real.
Practical note: these pieces are heavier than they look in photos because of the wide base. Factor that in if you’re choosing a shelf or altar surface that can’t handle a few pounds of mineral. The surface will show minor handling marks over time because the hardness is low. That’s not a defect, it’s the nature of gypsum. If pristine display is the goal, keep it out of reach of curious hands.
Selenite Iceberg Point FAQ
No. Selenite is gypsum, a calcium sulfate mineral, not quartz. It is softer and has a silky striated surface rather than the glassy look of quartz. The two are unrelated mineralogically, though both are widely used in crystal work.
No. Selenite is water soluble and will degrade if soaked or rinsed. Even prolonged humidity can dull the surface over time. Cleanse it with smoke, sound, or moonlight. Wipe it down with a dry or barely damp cloth only if needed.
Selenite is widely regarded as self cleansing, meaning it does not accumulate stagnant energy the way denser stones can. You can still set it in moonlight or clear it with sound if you prefer, but it is not strictly required.
The iceberg point is a shaped free form cut to display selenite natural layered striations in widening tiers tapering to a top point. It is not a natural formation but a cut piece designed to highlight the mineral structure.
Reviews
There are no reviews yet